LPJA8DE – Sun Hydraulics Normally open, modulating element with integral T-8A control cavity and pilot source from port 1, EPDM seals
Part number: LPJA8DN · LPJA8-DN · LPJA8 DN
Normally open, modulating element with integral T-8A control cavity and pilot source from port 1. Cavity T-19A, capacity 120 gpm (480 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
LPJA8-DN overview
LPJA8DN (LPJA8-DN, LPJA8 DN) is a Sun Hydraulics Sun Hydraulics Normally open, modulating element with integral T-8A control cavity and pilot source from port 1, rated 120 gpm (480 L/min.) and installed in cavity T-19A. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| LPJA8DN | Buna-N sealsBuna-N |
|---|---|
| LPJA8DV | Viton sealsViton |
| LPJA8DE | EPDM sealsEPDM |
Specifications
| Cavity | T-19A |
|---|---|
| Series | 4 |
| Capacity | 120 gpm (480 L/min.) |
| Maximum Operating Pressure | 5000 psi (350 bar) |
| Control Pilot Flow | 15 - 30 in³/min. (0,25 - 0,50 L/min.) |
| Pilot Control Cavity | T-8A |
| Control Orifice Diameter | .021 in. (0,53 mm) |
| Valve Hex Size | 1 5/8 in. (41,3 mm) |
| Valve Installation Torque | 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kit - Cartridge | Viton: 990019006 |
Compound cartridge (pilot and main stage) assembly information is provided for reference only. Cartridges must be ordered separately and assembled at point of use.
How to read LPJA8DN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so LPJA8DN, LPJA8-DN, LPJA8 DN are the same part.
| Model | LPJA8 — Sun Hydraulics Normally open, modulating element with integral T-8A control cavity and pilot source from port 1 |
|---|---|
| Bias Pressure | D — 50 psi (3,5 bar) |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Bias Pressure options
- D — 50 psi (3,5 bar)
Seal Material options
- N — Buna-N
- V — Viton
- E — EPDM
Manifold & standard assemblies
Sun manifolds for cavity T-19A (186)
- BKL Sun Hydraulics ISO 07: On A, port 3 to B Sandwich manifoldLPJA8DE-BKL — request assembly
- BKM Sun Hydraulics ISO 07: On B, port 3 to A Sandwich manifoldLPJA8DE-BKM — request assembly
- BKN Sun Hydraulics ISO 07: On A and B with cross pilot Sandwich manifoldLPJA8DE-BKN — request assembly
- BKO Sun Hydraulics ISO 07: On P, port 3 to T Sandwich manifoldLPJA8DE-BKO — request assembly
- K25 Sun Hydraulics Ninety degree with reverse flow check Line mount manifoldLPJA8DE-K25 — request assembly
- K26 Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K26 — request assembly
- K28 Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K28 — request assembly
- K2D Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K2D — request assembly
- K2E Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K2E — request assembly
- K2F Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K2F — request assembly
- K2L Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K2L — request assembly
- K2M Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldLPJA8DE-K2M — request assembly
Technical features
- NOTE: With the -8 control option, the main stage valve should first be installed to the correct torque value. The T-8A pilot control valve should then be installed into the main stage valve to its required torque value.
- The -8 control option allows the pilot control valve to be incorporated directly into the end of the logic cartridge via the T-8A cavity. These pilot control cartridges are sold separately and include electro-proportional, solenoid, air pilot, and hydraulic pilot operation. See Pilot Control Cartridges.
- All ports will accept 5000 psi (350 bar).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
CAD files
Frequently asked questions
Is LPJA8DN the same as LPJA8-DN?
Yes. Sun Hydraulics writes this part number as LPJA8DN. It is the model LPJA8 followed by the configuration code; hyphens, slashes and spaces are only dividers, so LPJA8DN, LPJA8-DN, LPJA8 DN all refer to the same product.
Do you supply LPJA8DN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including LPJA8DN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
What parts of the Sun cartridge valve are field serviceable?
Manufacturer reference: https://www.sunhydraulics.com/model/LPJA8
