-
- Assembly:
CWCGLGN-WDA/S3
-
- Material/finish:
/S3 – Clear zinc plated ductile iron, Buna-N seals
- Assembly:
CWCGLGN-WDA/S3
-
- Assembly:
CWCALHN-WDA/S3
-
- Material/finish:
/S3 – Clear zinc plated ductile iron, Buna-N seals
- Assembly:
CWCALHN-WDA/S3
-
- Assembly:
CWCGLGN-U2R/S4
-
- Material/finish:
/S4 – Ductile iron, black oxide finish, Buna-N seals
- Assembly:
CWCGLGN-U2R/S4
-
- Assembly:
CWCLLGN-U2R/Y3
-
- Material/finish:
/Y3 – Clear zinc plated ductile iron, Viton seals
- Assembly:
CWCLLGN-U2R/Y3
CDAB-XBN – Sun Hydraulics Back-to-back check/shuttle valve with signal at port 3
Roll over image to zoom in
Part number: CDABXBN · CDAB-XBN · CDAB XBN
Back-to-back check/shuttle valve with signal at port 3. Cavity T-11A, capacity 2.5 gpm (10 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
CDAB-XBN overview
CDABXBN (CDAB-XBN, CDAB XBN) is a Sun Hydraulics Sun Hydraulics Back-to-back check/shuttle valve with signal at port 3, rated 2.5 gpm (10 L/min.) and installed in cavity T-11A. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| CDABXBN/AP | Stainless Steel, PassivatedStainless Steel, Passivated |
|---|---|
| CDABXBN/LH | Mild Steel, Zinc-NickelMild Steel, Zinc-Nickel |
| CDABXBN | Standard Material/CoatingStandard Material/Coating |
Specifications
| Cavity | T-11A |
|---|---|
| Series | 1 |
| Capacity | 2.5 gpm (10 L/min.) |
| Maximum Operating Pressure | 5000 psi (350 bar) |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 drops/min. (0,3 cc/min.) |
| Valve Hex Size | 7/8 in. (22,2 mm) |
| Valve Installation Torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Model Weight | .30 lb (0,15 kg) |
| Seal kit - Cartridge | Viton: 990011006 |
How to read CDABXBN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so CDABXBN, CDAB-XBN, CDAB XBN are the same part.
| Model | CDAB — Sun Hydraulics Back-to-back check/shuttle valve with signal at port 3 |
|---|---|
| Control | X — Not Adjustable |
| Cracking Pressure | B — 15 psi (1 bar) |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- A — Auxiliary External -4 SAE Port
- B — Auxiliary External 1/4 BSPP Port
- X — Not Adjustable
- E — External 4-SAE Port, Port 3 blocked
Cracking Pressure options
- B — 15 psi (1 bar)
Seal Material options
- N — Buna-N
- V — Viton
Material/coating options
- /AP — Stainless Steel, Passivated
- /LH — Mild Steel, Zinc-Nickel
- — Standard Material/Coating
Manifold & standard assemblies
Sun manifolds for cavity T-11A (583)
- A2A Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2A — request assembly
- A2B Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2B — request assembly
- A2C Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2C — request assembly
- A2I Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2I — request assembly
- A2J Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2J — request assembly
- A2K Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2K — request assembly
- A2T Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2T — request assembly
- A2U Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2U — request assembly
- A2V Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A2V — request assembly
- A7A Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A7A — request assembly
- A7B Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A7B — request assembly
- A7C Sun Hydraulics Ninety degree with reverse flow check, accepts standard and weatherized coils Line mount manifoldCDABXBN-A7C — request assembly
Technical features
- Back-to-back check cartridges feature hardened, spherically lapped, guided poppets and a lightly stressed helical spring that result in excellent wear characteristics and extremely low leakage rates.
- The back-to-back checks do not provide a means of lowering a signal. They will trap a high signal if the load pressures drop to a lower pressure. Some means of bleeding off the signal should be provided.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
- 999-901-334 (PDF 344 KB)
- FloatingStyleScrewInCartridge2 (PDF 1 MB)
- TT_US_Cavity-New (PDF 522 KB)
- TT_US_Shuttles-New (PDF 500 KB)
CAD files
Frequently asked questions
Is CDABXBN the same as CDAB-XBN?
Yes. Sun Hydraulics writes this part number as CDABXBN. It is the model CDAB followed by the configuration code; hyphens, slashes and spaces are only dividers, so CDABXBN, CDAB-XBN, CDAB XBN all refer to the same product.
Do you supply CDABXBN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including CDABXBN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting or pilot operated - what do I use?
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
What parts of the Sun cartridge valve are field serviceable?
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Manufacturer reference: https://www.sunhydraulics.com/model/CDAB
