FPBIXDN212X01 – Sun Hydraulics FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1, DIN 43650-Form A, 12 VDC, with XMD-01 driver
Part number: FPBIXDN · FPBI-XDN · FPBI XDN
FLeX Series pilot-operated, normally open, electro-proportional throttle – flow 2-1. Cavity T-162A, capacity 5 gpm (20 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
FPBI-XDN overview
FPBIXDN (FPBI-XDN, FPBI XDN) is a Sun Hydraulics Sun Hydraulics FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1, rated 5 gpm (20 L/min.) and installed in cavity T-162A. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| FPBIXDN | No coilNo coil |
|---|---|
| FPBIXDN212 | DIN 43650-Form A, 12 VDCDIN 43650-Form A, 12 VDC |
| FPBIXDN212D | DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodesDIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes |
| FPBIXDN212X01 | DIN 43650-Form A, 12 VDC, with XMD-01 driverDIN 43650-Form A, 12 VDC, with XMD-01 driver |
Specifications
| Cavity | T-162A |
|---|---|
| Series | 0 |
| Capacity | 5 gpm (20 L/min.) |
| Maximum Operating Pressure | 5000 psi (350 bar) |
| Hysteresis (with dither) | 15% |
| Linearity (with dither) | 3% |
| Repeatability (with dither) | 3% |
| Recommended dither frequency | 140 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 0.004 in³/min.@5000 psi (0,07 cc/min.@350 bar) |
| Check Cracking Pressure | 100 psi (7 bar) |
| Viscosity Range | 35 - 2000 SUS (2,8 - 380 cSt) |
| Deadband, nominal (as a percentage of input) | 48% |
| Response Time - Typical | 50 ms |
| Switching Frequency | 15,000 max. cycles/hr |
| Valve Hex Size | 3/4 in. (19,1 mm) |
| Valve Installation Torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Model Weight | .35 lb (0,15 kg) |
| Seal kit - Cartridge | Viton: 990162006 |
Please verify cartridge clearance requirements when choosing a Sun manifold. Different valve controls and coils require different clearances. An additional 2.00 inches (50,8 mm) beyond the valve extension is needed for coil installation and removal.
How to read FPBIXDN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so FPBIXDN, FPBI-XDN, FPBI XDN are the same part.
| Model | FPBI — Sun Hydraulics FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 |
|---|---|
| Control | X — No Manual Override |
| Flow Rate | D — Nominal 5 gpm @ 200 psi (14 bar) differential (20 L/min.) |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- X — No Manual Override
Flow Rate options
- D — Nominal 5 gpm @ 200 psi (14 bar) differential (20 L/min.)
Seal Material options
- N — Buna-N
- V — Viton
Coil options
- — No coil
- 212 — DIN 43650-Form A, 12 VDC
- 212D — DIN 43650-Form A, 12 VDC, with transient voltage suppression (TVS) diodes
- 212X01 — DIN 43650-Form A, 12 VDC, with XMD-01 driver
- 212X02 — DIN 43650-Form A, 12 VDC, with XMD-02 driver
- 214 — DIN 43650-Form A, 14 VDC
- 214D — DIN 43650-Form A, 14 VDC, with transient voltage suppression (TVS) diodes
- 214X01 — DIN 43650-Form A, 14 VDC, with XMD-01 driver
- 214X02 — DIN 43650-Form A, 14 VDC, with XMD-02 driver
- 224 — DIN 43650-Form A, 24 VDC
- 224D — DIN 43650-Form A, 24 VDC, with transient voltage suppression (TVS) diodes
- 224X01 — DIN 43650-Form A, 24 VDC, with XMD-01 driver
- 224X02 — DIN 43650-Form A, 24 VDC, with XMD-02 driver
- 228 — DIN 43650-Form A, 28 VDC
- 228D — DIN 43650-Form A, 28 VDC, with transient voltage suppression (TVS) diodes
- 228X01 — DIN 43650-Form A, 28 VDC, with XMD-01 driver
- 228X02 — DIN 43650-Form A, 28 VDC, with XMD-02 driver
- 612 — AMP Junior Timer, 12 VDC
- 612D — AMP Junior Timer, 12 VDC, with transient voltage suppression (TVS) diodes
- 614 — AMP Junior Timer, 14 VDC
- 614D — AMP Junior Timer, 14 VDC, with transient voltage suppression (TVS) diodes
- 624 — AMP Junior Timer, 24 VDC
- 624D — AMP Junior Timer, 24 VDC, with transient voltage suppression (TVS) diodes
- 628 — AMP Junior Timer, 28 VDC
- 628D — AMP Junior Timer, 28 VDC, with transient voltage suppression (TVS) diodes
- 712 — Twin Lead, 12 VDC
- 712D — Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
- 714 — Twin Lead, 14 VDC
- 714D — Twin Lead, 14 VDC, with transient voltage suppression (TVS) diodes
- 724 — Twin Lead, 24 VDC
- 724D — Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
- 728 — Twin Lead, 28 VDC
- 728D — Twin Lead, 28 VDC, with transient voltage suppression (TVS) diodes
- 812 — Metri-Pack, 12 VDC
- 812D — Metri-Pack, 12 VDC, with transient voltage suppression (TVS) diodes
- 814 — Metri-Pack, 14 VDC
- 814D — Metri-Pack, 14 VDC, with transient voltage suppression (TVS) diodes
- 824 — Metri-Pack, 24 VDC
- 824D — Metri-Pack, 24 VDC, with transient voltage suppression (TVS) diodes
- 828 — Metri-Pack, 28 VDC
- 828D — Metri-Pack, 28 VDC, with transient voltage suppression (TVS) diodes
- 912 — Deutsch DT04-2P, 12 VDC
- 912D — Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
- 912X01 — Deutsch DT04-2P, 12 VDC, with XMD-01 driver
- 912X02 — Deutsch DT04-2P, 12 VDC, with XMD-02 driver
- 914 — Deutsch DT04-2P, 14 VDC
- 914D — Deutsch DT04-2P, 14 VDC, with transient voltage suppression (TVS) diodes
- 914X01 — Deutsch DT04-2P, 14 VDC, with XMD-01 driver
- 914X02 — Deutsch DT04-2P, 14 VDC, with XMD-02 driver
- 924 — Deutsch DT04-2P, 24 VDC
- 924D — Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
- 924X01 — Deutsch DT04-2P, 24 VDC, with XMD-01 driver
- 924X02 — Deutsch DT04-2P, 24 VDC, with XMD-02 driver
- 928 — Deutsch DT04-2P, 28 VDC
- 928D — Deutsch DT04-2P, 28 VDC, with transient voltage suppression (TVS) diodes
- 928X01 — Deutsch DT04-2P, 28 VDC, with XMD-01 driver
- 928X02 — Deutsch DT04-2P, 28 VDC, with XMD-02 driver
- JM24BD — Explosion Proof, Metric (M20 X 1.5), 24 VDC, 180 Degree, CSA and ATEX Certification
- JM24CD — Explosion Proof, Metric (M20 X 1.5), 24 VDC, 90 Degree, CSA and ATEX Certification
- JN24BD — Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 180 Degree, CSA and ATEX Certification
- JN24CD — Explosion Proof, 1/2 inch NPT mechanical conduit, 24 VDC, 90 Degree, CSA and ATEX Certification
Manifold & standard assemblies
Sun manifolds for cavity T-162A (56)
- AAA Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAA — request assembly
- AAB Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAB — request assembly
- AAC Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAC — request assembly
- AAH Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAH — request assembly
- AAI Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAI — request assembly
- AAJ Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAJ — request assembly
- AAT Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAT — request assembly
- AAU Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAU — request assembly
- AAV Sun Hydraulics Ninety degree Line mount manifoldFPBIXDN212X01-AAV — request assembly
- ABA Sun Hydraulics ISO 02: P to T Sandwich manifoldFPBIXDN212X01-ABA — request assembly
- ABB Sun Hydraulics ISO 02: A to B and B to A Sandwich manifoldFPBIXDN212X01-ABB — request assembly
- ABC Sun Hydraulics ISO 02: A and B to T Sandwich manifoldFPBIXDN212X01-ABC — request assembly
Technical features
- FLeX Series proportional valves are fully compatible with the XMD Expandable Mobile Drivers from Sun.
- Designed and tested to 10 million on-off operational cycles.
- Exceeds new NFPA test standard T2.6.1 R2014 for fatigue and burst pressure ratings.
- Improved linearity and resolution over similar competing valves.
- Designed using CFD fluid simulation for optimized geometries.
- For optimum performance, an amplifier with current feedback and adjustable dither (100 - 250 Hz) should be used.
- Capacities rated at 200-psi (14-bar) differential.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using an FPB* with an external compensator.
- All configurations of this valve include zinc-nickel plating as standard for 1000-hour salt fog protection.
- This valve can be used with both the 740 Series high-power coils and 747 Series hazardous location coils.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details.
- A FULL DATA SHEET is available for this model using the link at the top of the page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
- 747_Series_Coils_CoC-CSA (PDF 106 KB)
- 747_Series_Coils_Sira_16ATEX1091X_Iss1 (PDF 977 KB)
- 999-901-334 (PDF 344 KB)
- FloatingStyleScrewInCartridge2 (PDF 1 MB)
- TT_US_Amplifier-New (PDF 2 MB)
- TT_US_Cavity-New (PDF 522 KB)
- TT_US_Solenoid-Review1-New (PDF 1 MB)
- TT_US_coils-New (PDF 975 KB)
- rel-Prop_terms-definitionsN (PDF 3 MB)
CAD files
Frequently asked questions
Is FPBIXDN the same as FPBI-XDN?
Yes. Sun Hydraulics writes this part number as FPBIXDN. It is the model FPBI followed by the configuration code; hyphens, slashes and spaces are only dividers, so FPBIXDN, FPBI-XDN, FPBI XDN all refer to the same product.
Do you supply FPBIXDN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including FPBIXDN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
What is the pressure drop through a flow control?
In a meter-in flow control circuit if the pump is set at 3000 psi and the load is 2000 psi the drop through the flow control is 1000 psi. In a meter-out circuit with the load at 2000 psi the drop through the flow control is 2000 psi.
How accurate are Sun's flow controls?
We claim +/- 10%. We set to +/- 5% in production testing to allow for differences in customers' conditions. If you want accuracy, stay in the bottom 2/3rds of the range. Our 12 gpm (45 L/min.) flow controls are quite flat at 9 gpm (34 L/min.) and dead flat below 6 gpm (23 L/min.), until you get to the bottom of the range. Below about .25 gpm (1 L/min.), spool leakage and orifice conditions start to limit accuracy.
I have a heat problem, will Sun's priority flow control help?
I am afraid not. Unless you are overflowing your current valve and correctly size ours, you are not likely to notice any improvement. Priority flow controls are not efficient devices. They are an easy way to get more than 1 source of oil from 1 pump but they can generate a lot of heat. Try to size your actuators so the pressures are similar on both the priority and the bypass circuits. If you can't do that, try to have the lower flow leg be the lower pressure. The pump pressure is determined by whichever leg is higher and if there is flow that is taking a pressure drop that is not doing work it is creating heat.
What happens if I block the control flow (priority) port?
All flow is blocked, hence the term priority. The priority flow has to be satisfied.
What happens if I block the bypass port on a priority flow control?
The valve acts as a 2 port restrictive flow control.
What is the compensating pressure of Sun's flow controls?
The spring force in our flow controls equates to about 100 psi (7 bar). This is high enough to give the valves acceptable capacity and not too high for proper circuit operation. 100 psi (7 bar) is the spring force; at the upper end of the flow control's range, the drop through the valve will be as high as 250 psi (17 bar) before it starts modulating.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Is the FLeX program available in QuickDesign SmartConnect?
Yes. All FLeX phase 1 valves are available in the SmartConnect schematic tool, and are also available for submittal to QuickDesign.
What parts of the Sun cartridge valve are field serviceable?
Do FLeX valves utilize a floating nose design?
What is the difference between nominal and maximum flow capacity?
Can FLeX proportional valves be driven with an explosion proof coil?
Manufacturer reference: https://www.sunhydraulics.com/model/FPBI
