DMTAXAN – Sun Hydraulics 3-way, direct-acting, balanced spool, solenoid-operated directional valve, 3600 psi (250 bar) - common cavity, No coil
Part number: DMTAXAN · DMTA-XAN · DMTA XAN
3-way, direct-acting, balanced spool, solenoid-operated directional valve, 3600 psi (250 bar) – common cavity. Cavity SC-08-03, capacity 4 gpm (15 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
DMTA-XAN overview
DMTAXAN (DMTA-XAN, DMTA XAN) is a Sun Hydraulics Sun Hydraulics 3-way, direct-acting, balanced spool, solenoid-operated directional valve, 3600 psi (250 bar) - common cavity, rated 4 gpm (15 L/min.) and installed in cavity SC-08-03. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| DMTAXAN | No coilNo coil |
|---|---|
| DMTAXAN212 | DIN 43650-Form A, 12 VDCDIN 43650-Form A, 12 VDC |
| DMTAXAN224 | DIN 43650-Form A, 24 VDCDIN 43650-Form A, 24 VDC |
| DMTAXAN912D | Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodesDeutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes |
Specifications
| Cavity | SC-08-03 |
|---|---|
| Series | 0C |
| Capacity | 4 gpm (15 L/min.) |
| Maximum Operating Pressure | 3600 psi (250 bar) |
| Typical Valve Leakage at 110 SUS (24cSt) | 4.9 in³/min.@3600 psi (80,2 cc/min.@250 bar) |
| Response Time - Typical | 50 ms |
| Solenoid Tube Diameter | .51 in. |
| Valve Hex Size | 24 mm |
| Coil Nut Torque | 3.5 - 3.9 lbf ft (4,8 - 5,3 Nm) |
| Valve Installation Torque | 21 - 23 lbf ft (28 - 31 Nm) |
| Model Weight | .40 lb (0,20 kg) |
| Seal kit - Cartridge | Viton: 99C083006 |
How to read DMTAXAN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so DMTAXAN, DMTA-XAN, DMTA XAN are the same part.
| Model | DMTA — Sun Hydraulics 3-way, direct-acting, balanced spool, solenoid-operated directional valve, 3600 psi (250 bar) - common cavity |
|---|---|
| Control | X — No Manual Override |
| Spool Configuration | A — Normally Open 1 to 2, Closed 1 to 3 |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- L — Manual Override (Push with Detent)
- X — No Manual Override
Spool Configuration options
- A — Normally Open 1 to 2, Closed 1 to 3
- H — Normally Open 1 to 2, Closed 1 to 3
- N — Normally Open 2 to 3, Closed 1 to 2
- P — Normally Open 1 to 3, Closed 1 to 2
Seal Material options
- N — Buna-N
Coil options
- — No coil
- 212 — DIN 43650-Form A, 12 VDC
- 224 — DIN 43650-Form A, 24 VDC
- 912D — Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
- 924D — Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
Manifold & standard assemblies
Sun manifolds for cavity SC-08-03 (12)
- JRA Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRA — request assembly
- JRB Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRB — request assembly
- JRC Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRC — request assembly
- JRD Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRD — request assembly
- JRH Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRH — request assembly
- JRI Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRI — request assembly
- JRJ Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRJ — request assembly
- JRK Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRK — request assembly
- JRT Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRT — request assembly
- JRU Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRU — request assembly
- JRV Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRV — request assembly
- JRW Sun Hydraulics Ninety degree Line mount manifoldDMTAXAN-JRW — request assembly
Technical features
- Flow capacity may vary per spool type and inlet port. Refer to the performance limits for more information.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- The solenoid tube assembly is fatigue rated for 3600 psi (250 bar) service.
- This valve is available with a manual push-type override option.
- All ports are rated to a maximum operating pressure of 3600 psi (250 bar).
- The cartridge installation torque of 22 lbf ft (30 Nm) is required for best performance.
- Coil connector options offer ratings up to IP67. See individual coil product pages for details.
- The metal coil nut is a functional feature of the valve and should be correctly installed for proper performance of the valve.
- Coils can be mounted on the tube in either direction.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
CAD files
Frequently asked questions
Is DMTAXAN the same as DMTA-XAN?
Yes. Sun Hydraulics writes this part number as DMTAXAN. It is the model DMTA followed by the configuration code; hyphens, slashes and spaces are only dividers, so DMTAXAN, DMTA-XAN, DMTA XAN all refer to the same product.
Do you supply DMTAXAN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including DMTAXAN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting or pilot operated - what do I use?
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
What parts of the Sun cartridge valve are field serviceable?
Manufacturer reference: https://www.sunhydraulics.com/model/DMTA
