DLUTXCN – Sun Hydraulics 2-way, direct-acting, balanced spool, solenoid-operated directional valve, 3000 psi (210 bar) - common cavity, No coil
Roll over image to zoom in
Part number: DLUTXCN · DLUT-XCN · DLUT XCN
2-way, direct-acting, balanced spool, solenoid-operated directional valve, 3000 psi (210 bar) – common cavity. Cavity SC-10-02, capacity 6 gpm (23 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
DLUT-XCN overview
DLUTXCN (DLUT-XCN, DLUT XCN) is a Sun Hydraulics Sun Hydraulics 2-way, direct-acting, balanced spool, solenoid-operated directional valve, 3000 psi (210 bar) - common cavity, rated 6 gpm (23 L/min.) and installed in cavity SC-10-02. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| DLUTXCN | No coilNo coil |
|---|---|
| DLUTXCN712D | Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodesTwin Lead, 12 VDC, with transient voltage suppression (TVS) diodes |
| DLUTXCN724D | Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodesTwin Lead, 24 VDC, with transient voltage suppression (TVS) diodes |
| DLUTXCN912D | Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodesDeutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes |
Specifications
| Cavity | SC-10-02 |
|---|---|
| Series | 1C |
| Capacity | 6 gpm (23 L/min.) |
| Maximum Operating Pressure | 3000 psi (210 bar) |
| Typical Valve Leakage at 110 SUS (24 cSt) Inlet on 1 | 9.5 in³/min.@3000 psi |
| Typical Valve Leakage at 110 SUS (24cSt) Inlet on 2 | 2 in³/min.@3000 psi (30 cc/min.@210 bar) |
| Response Time - Typical | 50 ms |
| Switching Frequency | 15,000 max. cycles/hr |
| Solenoid Tube Diameter | .50 in. (12,7 mm) |
| Valve Hex Size | 25 mm |
| Coil Nut Torque | 3.5 - 3.9 lbf ft (4,8 - 5,3 Nm) |
| Valve Installation Torque | 21 - 23 lbf ft (28 - 31 Nm) |
| Model Weight | .30 lb (0,15 kg) |
How to read DLUTXCN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so DLUTXCN, DLUT-XCN, DLUT XCN are the same part.
| Model | DLUT — Sun Hydraulics 2-way, direct-acting, balanced spool, solenoid-operated directional valve, 3000 psi (210 bar) - common cavity |
|---|---|
| Control | X — - |
| Spool Configuration | C — Normally Closed |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- X — -
Spool Configuration options
- C — Normally Closed
Seal Material options
- N — Buna-N
Coil options
- — No coil
- 712D — Twin Lead, 12 VDC, with transient voltage suppression (TVS) diodes
- 724D — Twin Lead, 24 VDC, with transient voltage suppression (TVS) diodes
- 912D — Deutsch DT04-2P, 12 VDC, with transient voltage suppression (TVS) diodes
- 924D — Deutsch DT04-2P, 24 VDC, with transient voltage suppression (TVS) diodes
Manifold & standard assemblies
Sun manifolds for cavity SC-10-02 (12)
- JNA Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNA — request assembly
- JNB Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNB — request assembly
- JNC Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNC — request assembly
- JND Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JND — request assembly
- JNH Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNH — request assembly
- JNI Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNI — request assembly
- JNJ Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNJ — request assembly
- JNK Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNK — request assembly
- JNT Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNT — request assembly
- JNU Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNU — request assembly
- JNV Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNV — request assembly
- JNW Sun Hydraulics Ninety degree Line mount manifoldDLUTXCN-JNW — request assembly
Technical features
- The solenoid tube assembly is fatigue rated for 3000 psi (210 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details.
- All ports are rated to a maximum operating pressure of 3000 psi (210 bar).
- This valve features zinc plating on exposed surfaces.
- The cartridge installation torque of 22 lbf ft (30 Nm) should be respected for best performance.
- The metal coil nut is a functional feature of the valve and should be correctly installed for proper performance of the valve.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils can be mounted on the tube in either direction.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
- 999-901-334 (PDF 344 KB)
- FloatingStyleScrewInCartridge2 (PDF 1 MB)
- TT_US_Cavity-New (PDF 522 KB)
- TT_US_Solenoid-Review1-New (PDF 1 MB)
- TT_US_coils-New (PDF 975 KB)
CAD files
Frequently asked questions
Is DLUTXCN the same as DLUT-XCN?
Yes. Sun Hydraulics writes this part number as DLUTXCN. It is the model DLUT followed by the configuration code; hyphens, slashes and spaces are only dividers, so DLUTXCN, DLUT-XCN, DLUT XCN all refer to the same product.
Do you supply DLUTXCN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including DLUTXCN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting or pilot operated - what do I use?
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
What parts of the Sun cartridge valve are field serviceable?
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Manufacturer reference: https://www.sunhydraulics.com/model/DLUT
