DKJPLAN – Sun Hydraulics Normally closed, balanced poppet, logic element - pressure adjustable, Standard Material/Coating
Part number: DKJPLAN · DKJP-LAN · DKJP LAN
Normally closed, balanced poppet, logic element – pressure adjustable. Cavity T-24A, capacity 120 gpm (480 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
DKJP-LAN overview
DKJPLAN (DKJP-LAN, DKJP LAN) is a Sun Hydraulics Sun Hydraulics Normally closed, balanced poppet, logic element - pressure adjustable, rated 120 gpm (480 L/min.) and installed in cavity T-24A. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| DKJPLAN/AP | Stainless Steel, PassivatedStainless Steel, Passivated |
|---|---|
| DKJPLAN | Standard Material/CoatingStandard Material/Coating |
Specifications
| Cavity | T-24A |
|---|---|
| Series | 4 |
| Capacity | 120 gpm (480 L/min.) |
| Maximum Operating Pressure | 5000 psi (350 bar) |
| Minimum Pilot Pressure Required to Shift Valve | 300 psi (20 bar) |
| Control Pilot Flow | See Performance Data |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi (0,7 cc/min.@350 bar) |
| Valve Hex Size | 1 5/8 in. (41,3 mm) |
| Valve Installation Torque | 350 - 375 lbf ft (474 - 508 Nm) |
| Adjustment Screw Internal Hex Size | 5/32 in. (4 mm) |
| Locknut Hex Size | 9/16 in. (15 mm) |
| Locknut Torque | 80 - 90 lbf in. (9 - 10 Nm) |
| Seal kit - Cartridge | Viton: 990024006 |
How to read DKJPLAN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so DKJPLAN, DKJP-LAN, DKJP LAN are the same part.
| Model | DKJP — Sun Hydraulics Normally closed, balanced poppet, logic element - pressure adjustable |
|---|---|
| Control | L — Standard Screw Adjustment |
| Adjustment Range | A — 200 - 3000 psi (14 - 210 bar), 1000 psi (70 bar) Standard Setting |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- C — Tamper Resistant - Factory Set
- K — Handknob
- L — Standard Screw Adjustment
Adjustment Range options
- A — 200 - 3000 psi (14 - 210 bar), 1000 psi (70 bar) Standard Setting
- B — 200 - 1500 psi (14 - 105 bar), 1000 psi (70 bar) Standard Setting
- W — 200 - 4500 psi (14 - 315 bar), 1000 psi (70 bar) Standard Setting
- D — 200 - 800 psi (14 - 55 bar), 400 psi (28 bar) Standard Setting
Seal Material options
- N — Buna-N
- V — Viton
Material/coating options
- /AP — Stainless Steel, Passivated
- — Standard Material/Coating
Manifold & standard assemblies
Sun manifolds for cavity T-24A (74)
- Q46 Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q46 — request assembly
- Q48 Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q48 — request assembly
- Q4D Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4D — request assembly
- Q4E Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4E — request assembly
- Q4F Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4F — request assembly
- Q4L Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4L — request assembly
- Q4M Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4M — request assembly
- Q4N Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4N — request assembly
- Q4R Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4R — request assembly
- Q4S Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4S — request assembly
- Q4W Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4W — request assembly
- Q4X Sun Hydraulics Ninety degree with reverse flow check – reducing Line mount manifoldDKJPLAN-Q4X — request assembly
Technical features
- Unique balanced construction provides predictable switching with 5000 psi (350 bar) at both port 1 and port 2. When the remote pressure signal at port 3 exceeds the internal valve setting, the valve shifts to the open position.
- Any backpressure at the drain port is directly additive to the valve setting.
- Valve will reseat when the pilot pressure falls to 85% of the cracking value.
- Port 1 and port 2 are fully sealed from port 3 and port 4. Ports 3 and 4 are positively sealed.
- Leakage rate between port 1 and port 2 is very low, typically less than 10 drops/min. at 5000 psi (0,7 cc/min at 350 bar).
- All ports will accept 5000 psi (350 bar).
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
Frequently asked questions
Is DKJPLAN the same as DKJP-LAN?
Yes. Sun Hydraulics writes this part number as DKJPLAN. It is the model DKJP followed by the configuration code; hyphens, slashes and spaces are only dividers, so DKJPLAN, DKJP-LAN, DKJP LAN all refer to the same product.
Do you supply DKJPLAN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including DKJPLAN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting or pilot operated - what do I use?
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
I need to discharge a large accumulator. How can I increase the capacity of my discharge circuit?
Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.
What parts of the Sun cartridge valve are field serviceable?
Manufacturer reference: https://www.sunhydraulics.com/model/DKJP
