CNGD-XCN – Sun Hydraulics Free flow side to nose check valve with bypass orifice and port 3 blocked
Part number: CNGDXCN · CNGD-XCN · CNGD XCN
Free flow side to nose check valve with bypass orifice and port 3 blocked. Cavity T-17A, capacity 60 gpm (240 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
CNGD-XCN overview
CNGDXCN (CNGD-XCN, CNGD XCN) is a Sun Hydraulics Sun Hydraulics Free flow side to nose check valve with bypass orifice and port 3 blocked, rated 60 gpm (240 L/min.) and installed in cavity T-17A. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| CNGDXCN/AP | Stainless Steel, PassivatedStainless Steel, Passivated |
|---|---|
| CNGDXCN | Standard Material/CoatingStandard Material/Coating |
Specifications
| Cavity | T-17A |
|---|---|
| Series | 3 |
| Capacity | 60 gpm (240 L/min.) |
| Maximum Operating Pressure | 5000 psi (350 bar) |
| Orifice Range | .016 - .218 in. (0,4 - 5,5 mm) |
| Valve Hex Size | 1 1/4 in. (31,8 mm) |
| Valve Installation Torque | 150 - 160 lbf ft (203 - 217 Nm) |
| Model Weight | 1.10 lb (0,50 kg) |
| Seal kit - Cartridge | Viton: 990017006 |
How to read CNGDXCN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so CNGDXCN, CNGD-XCN, CNGD XCN are the same part.
| Model | CNGD — Sun Hydraulics Free flow side to nose check valve with bypass orifice and port 3 blocked |
|---|---|
| Control | X — Not Adjustable |
| Setting Range | C — 30 psi (2 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm) |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- X — Not Adjustable
Setting Range options
- A — 4 psi (0,3 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
- B — 15 psi (1 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
- C — 30 psi (2 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
- D — 50 psi (3,5 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
- E — 75 psi (5 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
- F — 100 psi (7 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
- Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .218 in. (0,4 - 5,5 mm)
Seal Material options
- N — Buna-N
- V — Viton
Material/coating options
- /AP — Stainless Steel, Passivated
- — Standard Material/Coating
Manifold & standard assemblies
Sun manifolds for cavity T-17A (377)
- BJO Sun Hydraulics ISO 05 – X&Y: On P, port 3 to T Sandwich manifoldCNGDXCN-BJO — request assembly
- BK2 Sun Hydraulics ISO 07: Reducer on A with reverse flow check Sandwich manifoldCNGDXCN-BK2 — request assembly
- BK4 Sun Hydraulics ISO 07: Sequence into A with reverse flow check Sandwich manifoldCNGDXCN-BK4 — request assembly
- BK5 Sun Hydraulics ISO 07: Sequence into B with reverse flow check Sandwich manifoldCNGDXCN-BK5 — request assembly
- BK6 Sun Hydraulics ISO 07: Sequence out of A with reverse flow check Sandwich manifoldCNGDXCN-BK6 — request assembly
- BK7 Sun Hydraulics ISO 07: Sequence out of B with reverse flow check Sandwich manifoldCNGDXCN-BK7 — request assembly
- BK8 Sun Hydraulics ISO 07: Cushion lock Sandwich manifoldCNGDXCN-BK8 — request assembly
- BK9 Sun Hydraulics ISO 07: Reducer on A and B with reverse flow check Sandwich manifoldCNGDXCN-BK9 — request assembly
- BKA Sun Hydraulics ISO 07: On A, port 3 to B Sandwich manifoldCNGDXCN-BKA — request assembly
- BKB Sun Hydraulics ISO 07: On B, port 3 to A Sandwich manifoldCNGDXCN-BKB — request assembly
- BKC Sun Hydraulics ISO 07: On A, port 3 external Sandwich manifoldCNGDXCN-BKC — request assembly
- BKJ Sun Hydraulics ISO 07: Reducer on B with reverse flow check Sandwich manifoldCNGDXCN-BKJ — request assembly
Technical features
- When used in a full time regeneration circuit these valves allow full force to be developed by the cylinder when it comes to a stop. The bypass orifice drops the rod end pressure to zero when flow out of the rod stops.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
CAD files
Frequently asked questions
Is CNGDXCN the same as CNGD-XCN?
Yes. Sun Hydraulics writes this part number as CNGDXCN. It is the model CNGD followed by the configuration code; hyphens, slashes and spaces are only dividers, so CNGDXCN, CNGD-XCN, CNGD XCN all refer to the same product.
Do you supply CNGDXCN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including CNGDXCN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting or pilot operated - what do I use?
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
I need to discharge a large accumulator. How can I increase the capacity of my discharge circuit?
Because of the very high ratio, the COFO has limited capacity. The discharge path is across a .050 inch (1,3 mm) diameter orifice. If you have large accumulators combined with low precharge pressures, this may not discharge the energy quickly enough. Using the COFO XDN cartridge in conjunction with an LODA XDN will provide capacity for larger applications.
What parts of the Sun cartridge valve are field serviceable?
Manufacturer reference: https://www.sunhydraulics.com/model/CNGD
