DAAH-BCN – Sun Hydraulics 2-way, hydraulically operated, spool directional valve – pilot capacity
Roll over image to zoom in
Part number: DAAHBCN · DAAH-BCN · DAAH BCN
2-way, hydraulically operated, spool directional valve – pilot capacity. Cavity T-8A, capacity .25 gpm (1 L/min.). Genuine Sun Hydraulics cartridge — MultiFlow is an authorized distributor.
DAAH-BCN overview
DAAHBCN (DAAH-BCN, DAAH BCN) is a Sun Hydraulics Sun Hydraulics 2-way, hydraulically operated, spool directional valve - pilot capacity, rated .25 gpm (1 L/min.) and installed in cavity T-8A. MultiFlow supplies genuine Sun Hydraulics cartridges in the UAE, GCC and India — use Add to Enquiry above for availability and a quotation.
Ordering codes
Pick the code that matches the material and finish you need. Add it to your enquiry above, or tap a code to select it.
| DAAHBCN/AP | Stainless Steel, PassivatedStainless Steel, Passivated |
|---|---|
| DAAHBCN | Standard Material/CoatingStandard Material/Coating |
Specifications
| Cavity | T-8A |
|---|---|
| Series | P |
| Capacity | .25 gpm (1 L/min.) |
| Maximum Operating Pressure | 5000 psi (350 bar) |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 drops/min. (0,3 cc/min.) |
| Minimum Pilot Pressure to Operate | See Technical Features |
| Pilot Control Port | See Control Options |
| Valve Hex Size | 7/8 in. (22,2 mm) |
| Valve Installation Torque | 20 - 25 lbf ft (27 - 33 Nm) |
| Seal kit - Cartridge | Viton: 990508006 |
How to read DAAHBCN
Sun part numbers are the model followed by one code per option. Hyphens, slashes and spaces are only dividers, so DAAHBCN, DAAH-BCN, DAAH BCN are the same part.
| Model | DAAH — Sun Hydraulics 2-way, hydraulically operated, spool directional valve - pilot capacity |
|---|---|
| Control | B — External 4-SAE Port |
| Spool Configuration | C — Normally Closed |
| Seal Material | N — Buna-N |
| Material / coating | Add /AP (stainless steel, passivated) or /LH (mild steel, zinc-nickel) to the end; no suffix is the standard finish. |
Control options
- A — External 1/8 NPTF Port
- B — External 4-SAE Port
- D — External 1/8 BSPP Port
Spool Configuration options
- C — Normally Closed
- H — Normally Open
Seal Material options
- N — Buna-N
- V — Viton
Material/coating options
- /AP — Stainless Steel, Passivated
- — Standard Material/Coating
Manifold & standard assemblies
Sun manifolds for cavity T-8A (9)
- ADJ Sun Hydraulics Reducer/reliever on P2 Line mount manifoldDAAHBCN-ADJ — request assembly
- ADP Sun Hydraulics Reducer/reliever on P2 Line mount manifoldDAAHBCN-ADP — request assembly
- U5T Sun Hydraulics Ninety degree, accepts standard and weatherized coils Line mount manifoldDAAHBCN-U5T — request assembly
- WFL Sun Hydraulics Ninety degree Line mount manifoldDAAHBCN-WFL — request assembly
- WFM Sun Hydraulics Ninety degree Line mount manifoldDAAHBCN-WFM — request assembly
- WFN Sun Hydraulics Ninety degree Line mount manifoldDAAHBCN-WFN — request assembly
- WFO Sun Hydraulics Ninety degree Line mount manifoldDAAHBCN-WFO — request assembly
- WFP Sun Hydraulics Ninety degree Line mount manifoldDAAHBCN-WFP — request assembly
- WFQ Sun Hydraulics Ninety degree Line mount manifoldDAAHBCN-WFQ — request assembly
Technical features
- Utilizes the Sun T-8A 2-port cavity making it the ideal choice to use in conjunction with Sun's main stage pilot or vent-to-operate cartridges. Separate pilot lines are eliminated and only one cavity needs to be machined to accommodate both the control and primary function. Note: All 2-position, 2-way pilot stage control cartridges utilize the same cavity and are physically interchangeable. Functionality is the only consideration.
- Note: The main stage valve should first be installed to the correct torque value followed by the T-8A pilot control section into the main stage valve to its required torque value.
- The preferred flow path through the valve is port 2 to port 1.
- Different pilot control port options are available. See Option Selection for details.
- All ports will accept 5000 psi (350 bar) including the pilot control port.
- Hardened spool and sleeve provide consistent operation, low spool leakage rates and superior wear characteristics.
- The minimum pilot pressure required to operate the valve is determined by the following formula: pilot pressure = 85 psi + pressure @ Port 1 times .023. This results in a pilot pressure range of 85 to 200 psi. In metric; pilot pressure = 6 bar + pressure @ Port 1 times 0,023. This results in a pilot pressure of 6 to 14 bar.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Drawings, symbol & performance curves
Downloads
Datasheet
Technical reference sheets
CAD files
Frequently asked questions
Is DAAHBCN the same as DAAH-BCN?
Yes. Sun Hydraulics writes this part number as DAAHBCN. It is the model DAAH followed by the configuration code; hyphens, slashes and spaces are only dividers, so DAAHBCN, DAAH-BCN, DAAH BCN all refer to the same product.
Do you supply DAAHBCN in the UAE, GCC and India?
Yes. MultiFlow supplies genuine Sun Hydraulics cartridges, including DAAHBCN, to customers in the UAE, the wider GCC and India. Use Add to Enquiry on this page for availability, lead time and a quotation.
Can I get the datasheet and CAD files?
Yes. The datasheet, technical reference sheets and CAD files (DXF, DWG, STP) are listed in the Downloads section of this page.
How big is a drop of hydraulic oil?
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct acting or pilot operated - what do I use?
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
What parts of the Sun cartridge valve are field serviceable?
Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Manufacturer reference: https://www.sunhydraulics.com/model/DAAH
